What is a Block Diagram in a Control System?A block diagram is used to represent a control system in diagram form. In other words, the practical representation of a control system is its block diagram. Each element of the control system is represented with a block and the block is the symbolic representation of the transfer function of that element.It is not always convenient to derive a complex control system’s entire transfer function in a single function. It is easier to derive the transfer f

In the present article we will discuss all about discrete signals which are made up of discrete data or sampled data or also known as digital data of control system. Now before we discuss this topic in detail it is very essential to know, what is the need of a digital technology though we have analog systems?So let us discuss first some advantages of digital system over analog system. Power consumption is less in digital system as compared to analog system. Digital systems can handle non linear

Before I introduce you about various compensation in control system in detail, it is very essential to know the uses of compensating networks in the control system. The important uses of the compensating networks are written below.Necessary of Compensation In order to obtain the desired performance of the system, we use compensating networks. Compensating networks are applied to the system in the form of feed forward path gain adjustment. Compensate a unstable system to make it stable. A compens

The describing function is an approximate procedure for analyzing certain nonlinear control problems in control engineering. To start, let us first recall the basic definition of a linear control system. Linear control systems are those where the principle of superposition (if the two inputs are applied simultaneously, then the output will be the sum of two outputs) is applicable. In the case of highly nonlinear control systems, we are unable to apply the principle of superposition.Analysis of d

What is a Controller?In control systems, a controller is a mechanism that seeks to minimize the difference between the actual value of a system (i.e. the process variable) and the desired value of the system (i.e. the setpoint). Controllers are a fundamental part of control engineering and used in all complex control systems.Before we introduce you to various controllers in detail, it is essential to know the uses of controllers in the theory of control systems. The important uses of the control

A control system is a system of devices that manages, commands, directs or regulates the behavior of other devices to achieve a desired result. In other words, the definition of a control system can be simplified as a system which controls other systems to achieve a desired state. There are various types of control systems, which can be broadly categorised as linear control systems or non-linear control systems. These types of control systems are discussed in detail below.Linear Control SystemsI

What is a Control System?A control system is defined as a system of devices that manages, commands, directs, or regulates the behavior of other devices or systems to achieve a desired result. A control system achieves this through control loops, which are a process designed to maintain a process variable at a desired set point.In other words, the definition of a control system can be simplified as a system, which controls other systems. As human civilization is being modernized day by day the de

What is an On Off Controller?Sometimes, the control element has only two positions either it is fully closed or fully open. This control element does not operate at any intermediate position, i.e. partly open or partly closed position. The control system made for controlling such elements is known as the on-off control theory. In this control system, when process variable changes and crosses a certain preset level, the output value of the system is suddenly fully opened and gives 100 % output.Ge

AC Induction motors offer enviable operational characteristics such as robustness, reliability and ease of control. They are extensively used in various applications ranging from industrial motion control systems to home appliances. However, the use of induction motors at its highest efficiency is a challenging task because of their complex mathematical model and non-linear characteristic during saturation. These factors make the control of induction motor difficult and call for the use of a hig

What is Control EngineeringControl system engineering is the branch of engineering which deals with the principles of control theory, to design a system which gives yields the desired behavior in a controlled manner. Hence, although control engineering is often taught within electrical engineering at university, it is an interdisciplinary topic.Control system engineers analyze, design, and optimize complex systems which consist of highly integrated coordination of mechanical, electrical, chemica