WD-WHT Cable sheath tester - Wone

WD-WHT Cable sheath tester

$4000.00

Basic info

Brand	Wone
Model NO.	WD-WHT Cable sheath tester
Rated voltage	220V
Rated frequency	50（Hz）
Series	WD-WHT

Product Detail

Description

According to the characteristics of the outer sheath fault, this instrument uses the voltage drop method to initially measure the ground fault of the cable outer sheath, and then uses the step voltage method to accurately find the fault point. The instrument is used for fault detection of outer sheath of cross-linked cables; it can also be used for fault detection of buried wires and all-plastic wires (cables without metal sheath); it can also be used for 15KV DC withstand voltage test of cables or other electrical appliances.

Specifications

transmitter

Power supply	AC220V±10% 50HZ
Input power	1000W
Display mode	5.6 inch LCD screen
Output voltage	DC 0---15KV negative polarity high voltage; continuously adjustable
Working mode	DC, withstand voltage, pulse
Maximum output current	1A. It can work continuously in short circuit
Withstand voltage gear	0---15KV negative polarity high voltage
maximum current	1000μA
Dimension	450mm×330mm×350mm
Weight	20Kg

receiver

Display mode	color LCD display
Display range	50-0-50 (wider display range and higher resolution)
Sensitivity	0.10mV
Power supply	6×1.5V
Dimension	120mm×120mm×230mm
Weight	1Kg

Other recommendations

More

New Knowledges

More

What is the method for determining the temperature of a coil?

What is the method for determining the temperature of a coil?

Methods to Determine Coil TemperatureThere are several methods to determine coil temperature, and the choice depends on the application scenario, required accuracy, and available equipment and technology. Below are some commonly used methods to determine coil temperature:1. Direct Measurement Methodsa. Thermocouples Principle: Thermocouples utilize the thermoelectric effect produced by the contact of two different metal materials to measure temperature. Usage: Install the thermocouple probe near

Encyclopedia

01/10/2025

What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?

What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?

Advantages of Step-Up Autotransformers Compared to Step-Up TransformersStep-up autotransformers and traditional step-up transformers have some notable differences in design and application. Below are the advantages of step-up autotransformers over traditional step-up transformers, as well as the typical scenarios where they are used.Advantages of Step-Up AutotransformersHigher Efficiency: Reduced Copper Losses: Due to the shared winding between the primary and secondary sides, the total length a

Encyclopedia

01/10/2025

What happens inside a surge protector during a lightning strike?

What happens inside a surge protector during a lightning strike?

What Happens Inside a Surge Protective Device During a Lightning Strike?During a lightning strike, surge protective devices (SPDs) play a crucial role in protecting electrical equipment from transient overvoltages (i.e., surges). Below are the main processes and mechanisms that occur inside an SPD during such events:1. Surge Detection and ResponseWhen a surge caused by a lightning strike enters the power system, the surge protective device quickly detects this abnormal voltage. Typically, SPDs h

Encyclopedia

01/10/2025

What is a fixed capacitance?

What is a fixed capacitance?

1. DefinitionWhat is commonly referred to as a "permanent capacitor" is likely a popular term. Strictly speaking, it may refer to a fixed capacitor. A fixed capacitor is a type of capacitor with a constant capacitance value. In a circuit, its capacitance will not change due to normal voltage, current variations, or other common external conditions. Its main functions include storing electrical energy, filtering, coupling, and bypassing.2. Structure and PrincipleStructureTake the common ceramic c

Encyclopedia

01/10/2025