300W 500W 600W 800W 1000W Pure sine wave inverter - Wone

300W 500W 600W 800W 1000W Pure sine wave inverter

$660.00

Basic info

Brand	Wone
Model NO.	Pure sine wave inverter
Rated Output Rating	1.5kW
Series	PWS series

Product Detail

Technical parameter：

What is a pure sine wave inverter?

A pure sine wave inverter converts direct current (DC) to alternating current (AC) using internal power electronic devices such as IGBTs and MOSFETs. The key lies in how to generate an AC output that is close to an ideal sine wave. The specific steps are as follows:

DC Input: The inverter receives DC from a battery or other DC power sources.
DC Boost: The input DC voltage is increased to the required level through a boosting circuit to ensure the stability of the output voltage.
Pulse Width Modulation (PWM): Pulse Width Modulation technology is used to generate a waveform that approximates a sine wave. PWM technology controls the duty cycle of the output voltage through high-speed switching devices, making the final output voltage waveform close to a sine wave.
Filtering: A filter is used to further smooth the output voltage waveform, eliminate high-frequency harmonic components, and ensure that the output voltage is a high-quality sine wave.
AC Output: After the above processing, the inverter outputs an AC that is close to an ideal sine wave for the load to use.

Other recommendations

More

New Knowledges

More

What is the method for determining the temperature of a coil?

What is the method for determining the temperature of a coil?

Methods to Determine Coil TemperatureThere are several methods to determine coil temperature, and the choice depends on the application scenario, required accuracy, and available equipment and technology. Below are some commonly used methods to determine coil temperature:1. Direct Measurement Methodsa. Thermocouples Principle: Thermocouples utilize the thermoelectric effect produced by the contact of two different metal materials to measure temperature. Usage: Install the thermocouple probe near

Encyclopedia

01/10/2025

What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?

What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?

Advantages of Step-Up Autotransformers Compared to Step-Up TransformersStep-up autotransformers and traditional step-up transformers have some notable differences in design and application. Below are the advantages of step-up autotransformers over traditional step-up transformers, as well as the typical scenarios where they are used.Advantages of Step-Up AutotransformersHigher Efficiency: Reduced Copper Losses: Due to the shared winding between the primary and secondary sides, the total length a

Encyclopedia

01/10/2025

What happens inside a surge protector during a lightning strike?

What happens inside a surge protector during a lightning strike?

What Happens Inside a Surge Protective Device During a Lightning Strike?During a lightning strike, surge protective devices (SPDs) play a crucial role in protecting electrical equipment from transient overvoltages (i.e., surges). Below are the main processes and mechanisms that occur inside an SPD during such events:1. Surge Detection and ResponseWhen a surge caused by a lightning strike enters the power system, the surge protective device quickly detects this abnormal voltage. Typically, SPDs h

Encyclopedia

01/10/2025

What is a fixed capacitance?

What is a fixed capacitance?

1. DefinitionWhat is commonly referred to as a "permanent capacitor" is likely a popular term. Strictly speaking, it may refer to a fixed capacitor. A fixed capacitor is a type of capacitor with a constant capacitance value. In a circuit, its capacitance will not change due to normal voltage, current variations, or other common external conditions. Its main functions include storing electrical energy, filtering, coupling, and bypassing.2. Structure and PrincipleStructureTake the common ceramic c

Encyclopedia

01/10/2025