300W 800W 1000W 3000W Power inverter - Experts Electrical

English
RFQ

Download the app

300W 800W 1000W 3000W Power inverter

$750.00

Model

Basic info Product Detail Supplier

Basic info

Brand	Wone
Model NO.	Power inverter
Rated Output Rating	3kW
Series	PWI series

Product Detail

Technical parameter：

How does an inverter perform Pulse Width Modulation (PMW)?

The core concept of PWM (Pulse Width Modulation) is to control the average output voltage by changing the pulse width of the signal. Here are the detailed steps:

Reference Signal (Carrier Signal): PWM inverters typically use a fixed frequency triangular wave (or sawtooth wave) as a reference signal, known as the carrier signal.
Modulation Signal: The modulation signal is a varying sine wave that represents the desired output AC waveform. The amplitude of the modulation signal determines the magnitude of the output voltage, while its frequency determines the frequency of the output voltage.
Comparison: The modulation signal is compared with the carrier signal. When the instantaneous value of the modulation signal is greater than that of the carrier signal, a high-level output is produced; otherwise, a low-level output is produced.
Generation of PWM Waveform: Through the above comparison process, a series of rectangular waves with varying widths are generated. The width of these rectangular waves changes over time, simulating the shape of a sine wave.
Filtering: Finally, a filter is used to remove the high-frequency components from the PWM waveform, resulting in a smoother sine wave output.

Know your supplier

Wone

Main Categories

High voltage/Low voltage/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment

Business Type

Design/Manufacture/Sales

Highest Annual Export (USD)

$50,000,000

Professional Experience

1 years

Workplace

65666m²m²

占位

占位

Related Products

Related Knowledges

The design of the three-purpose grounding transformer

The design of the three-purpose grounding transformer

Underground Power Cable Transmission LinesDirect - buried power cable lines have large ground - distributed capacitance, causing high single - phase - to - ground short - circuit capacitive current. For 10 kV lines, if this current exceeds 10 A, arcs hardly self - extinguish, risking arc overvoltage and endangering line equipment. Arc extinction is thus necessary. With a Dyn - connected main transformer, an arc - suppression coil on the secondary neutral point suffices. For Yd - connected ones,

Failure Analysis and Design Optimization of Conventional Grounding Transformers

Failure Analysis and Design Optimization of Conventional Grounding Transformers

I. Core Cause of Damage: Electrodynamic Impact (Complying with GB/T 1094.5 / IEC 60076-5)The direct cause of high-voltage winding end collapse is the instantaneous electrodynamic impact induced by short-circuit current. When a single-phase grounding fault occurs in the system (such as lightning overvoltage, insulation breakdown, etc.), the grounding transformer, as the fault current path, withstands high-amplitude and steep-rise-rate short-circuit currents. According to Ampère's force law

Analysis of Grounding Transformer Operational Behavior Under System Single-Phase-to-Ground Fault Conditions

Analysis of Grounding Transformer Operational Behavior Under System Single-Phase-to-Ground Fault Conditions

1 Theoretical AnalysisIn distribution networks, grounding transformers serve two key roles: powering low - voltage loads and connecting arc - suppression coils at neutrals for grounding protection. Grounding faults, the most common distribution network fault, heavily impact transformers’ operating characteristics, causing sharp changes in electromagnetic parameters and status.To study transformers’ dynamic behaviors under single - phase grounding faults, build this model: Assume a tr

Design Calculations for Neutral Grounding Schemes and Grounding Transformer Sizing in Utility-Scale Solar PV Plants

Design Calculations for Neutral Grounding Schemes and Grounding Transformer Sizing in Utility-Scale Solar PV Plants

1 Classification of Neutral Grounding Methods for Solar Photovoltaic Power StationsInfluenced by differences in voltage levels and grid structures across regions, the neutral grounding methods of power systems are mainly categorized into non-effective grounding and effective grounding. Non-effective grounding includes neutral grounding via arc suppression coils and neutral ungrounded systems, while effective grounding comprises neutral solid grounding and neutral grounding via resistors. The sel

Zero-Sequence Impedance Characterization of Dry-Type Grounding Transformer with ZN Connection

Zero-Sequence Impedance Characterization of Dry-Type Grounding Transformer with ZN Connection

In a neutral-insulated three-phase power system, an earthing transformer provides an artificial neutral point, which can be solidly earthed or earthed via reactors/arc suppression coils. The ZNyn11 connection is typical, where zero-sequence magnetomotive forces in the inner/outer half-windings of the same core column cancel out, balancing fault currents in series windings and minimizing zero-sequence leakage flux/impedance.Zero-sequence impedance is critical: it determines fault current magnitud

Case Analysis on Maloperation of Grounding Transformer Overcurrent Protection Relay

Case Analysis on Maloperation of Grounding Transformer Overcurrent Protection Relay

The neutral grounding mode refers to the connection between the power system neutral point and ground. In China's 35 kV and below systems, common methods include ungrounded neutral, arc-suppression coil grounding, and small-resistance grounding. The ungrounded mode is widely used as it allows short-term operation during single-phase grounding faults, while small-resistance grounding has become mainstream for its fast fault removal and overvoltage limitation. Many substations install grounding tr

商品视频播放