300W 800W 1000W 3000W Power inverter - Experts Electrical

Français
RFQ

Download the app

300W 800W 1000W 3000W Power inverter

$102.00

Basic info

Brand	Wone
Model NO.	Power inverter
Rated Output Rating	0.3kW
Series	PWI series

Product Detail

Technical parameter：

How does an inverter perform Pulse Width Modulation (PMW)?

The core concept of PWM (Pulse Width Modulation) is to control the average output voltage by changing the pulse width of the signal. Here are the detailed steps:

Reference Signal (Carrier Signal): PWM inverters typically use a fixed frequency triangular wave (or sawtooth wave) as a reference signal, known as the carrier signal.
Modulation Signal: The modulation signal is a varying sine wave that represents the desired output AC waveform. The amplitude of the modulation signal determines the magnitude of the output voltage, while its frequency determines the frequency of the output voltage.
Comparison: The modulation signal is compared with the carrier signal. When the instantaneous value of the modulation signal is greater than that of the carrier signal, a high-level output is produced; otherwise, a low-level output is produced.
Generation of PWM Waveform: Through the above comparison process, a series of rectangular waves with varying widths are generated. The width of these rectangular waves changes over time, simulating the shape of a sine wave.
Filtering: Finally, a filter is used to remove the high-frequency components from the PWM waveform, resulting in a smoother sine wave output.

Other recommendations

New Knowledges

Capacitor Start Induction Motor

Capacitor Start Induction Motor

Capacitor Start Motors are a type of single - phase induction motors. They utilize a capacitor within the auxiliary winding circuit to create a significant phase difference between the current flowing through the main winding and that in the auxiliary winding. As the name "capacitor start" clearly implies, these motors rely on a capacitor specifically for the starting process. The diagram below illustrates the connection schematic of a Capacitor Start Motor.The capacitor start motor features a c

Encyclopedia

05/09/2025

Interlocking system for switchgear automation in double busbar substation

Interlocking system for switchgear automation in double busbar substation

The tripping of all circuit breakers (CBs) by protective relays is unrestricted.The opening command for all circuit breakers, except for the busbar coupler circuit breaker, is unrestricted.An opening command cannot be issued for the busbar coupler circuit breaker under the following circumstances:Both busbar disconnect switches (DSs) of any feeder are closed.Any busbar disconnect switch or sectionalizing disconnect switch is in the transition state.A closing command cannot be given for a circuit

Edwiin

05/09/2025

Analysis of the Fault Causes and Handling Steps of SF6 Circuit Breakers

Analysis of the Fault Causes and Handling Steps of SF6 Circuit Breakers

In an SF₆ circuit breaker, the SF₆ gas can decompose into toxic and corrosive gases and water in a high-temperature environment, which can damage the insulating layer. To prevent this situation, while effectively strengthening the protection of electrical components, the insulation level should also be improved. In addition, faults should be analyzed, and corresponding measures should be taken for treatment.1 Case AnalysisA 110 kV switch in a substation was struck by lightning, causing a reclosi

Felix Spark

05/09/2025

Analysis of Common Causes of Gas Leakage in SF6 Circuit Breakers of Substations and Research on Detection Measures

Analysis of Common Causes of Gas Leakage in SF6 Circuit Breakers of Substations and Research on Detection Measures

With the advancement of technology and the improvement of production levels, the performance and quality of SF₆ circuit breaker equipment have been continuously enhanced, and the products have been widely recognized by customers. However, with its extensive application, the frequency of faults has also increased. The causes of faults include issues such as design principles, manufacturing processes, and material selection. Through investigation and statistics on the causes of faults, it is known

Oliver Watts

05/09/2025