• 610-635 Watt mono-facial module lower LID/LeTID
610-635 Watt mono-facial module lower LID/LeTID
discuss personally
SP-635M-V
SP-630M-V
SP-625M-V
SP-620M-V
SP-615M-V
SP-610M-V
Basic info
Brand Wone
Model NO. 66HL4M-(V) 610-635 Watt MONO-FACIAL MODULE
Maximum Power 630Wp
Series 66HL4M-(V)
Product Detail

Certification

  • IEC61215:2021 / IEC61730:2023 · 

  • IEC61701 / IEC62716 / IEC60068 / IEC62804 ·

  •  ISO9001:2015: Quality Management System ·

  •  ISO14001:2015: Environment Management System ·

  •  ISO45001:2018: Occupational health and safety management systems.

Features

  • N-type modules with Tunnel Oxide Passivating Contacts (TOPcon) technology offer lower LID/LeTID degradation and better low light performance.

  • N-type modules with Solar's HOT 3.0 technology offer better reliability and efficiency.

  • High salt mist and ammonia resistance.

  • Certified to withstand: 5400 Pa front side max static test load 2400 Pa rear side max static test load.

  • Better light trapping and current collection to improve module power output and reliability.

  • Minimizes the chance of degradation caused by PID phenomena through optimization of cell production technology and material control.

image.png

Mechanical Characteristics

image.png

Packaging Configuration

image.png

Specifications (STC)

image.png

Application Conditions

image.png

Engineering Drawings

image.png

image.png

*Note: For specific dimensions and tolerance ranges, please refer to the corresponding detailed module drawings.

Electrical Performance & Temperature Dependence

image.png

image.png

What is the LID/LeTID phenomenon?

LID (Light Induced Degradation) and LeTID (Light and Elevated Temperature Induced Degradation) are two phenomena that affect the performance of solar cells. Especially in high-power output modules, these issues are particularly important. The following is an explanation of the LID and LeTID phenomena and their impact on 610-635 watt single-sided modules.

  • LID：LID refers to the performance degradation phenomenon that occurs when solar cells are exposed to sunlight for the first time. This phenomenon is mainly due to the formation of boron-oxygen complexes in the battery material (usually p-type monocrystalline silicon) under illumination, resulting in a reduction in the efficiency of the battery.

  • LeTID：LeTID is another performance degradation phenomenon. It occurs when the battery operates under high temperature (for example, above 70 °C) and illumination conditions. The performance degradation caused by LeTID is more serious than that of LID, and the recovery speed is slower.




Other recommendations
More
New Knowledges
More
What is the method for determining the temperature of a coil?
What is the method for determining the temperature of a coil?
Methods to Determine Coil TemperatureThere are several methods to determine coil temperature, and the choice depends on the application scenario, required accuracy, and available equipment and technology. Below are some commonly used methods to determine coil temperature:1. Direct Measurement Methodsa. Thermocouples Principle: Thermocouples utilize the thermoelectric effect produced by the contact of two different metal materials to measure temperature. Usage: Install the thermocouple probe near
Encyclopedia
01/10/2025
What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?
What are the advantages of step-up autotransformers over step-up transformers and where are they usually used?
Advantages of Step-Up Autotransformers Compared to Step-Up TransformersStep-up autotransformers and traditional step-up transformers have some notable differences in design and application. Below are the advantages of step-up autotransformers over traditional step-up transformers, as well as the typical scenarios where they are used.Advantages of Step-Up AutotransformersHigher Efficiency: Reduced Copper Losses: Due to the shared winding between the primary and secondary sides, the total length a
Encyclopedia
01/10/2025
What happens inside a surge protector during a lightning strike?
What happens inside a surge protector during a lightning strike?
What Happens Inside a Surge Protective Device During a Lightning Strike?During a lightning strike, surge protective devices (SPDs) play a crucial role in protecting electrical equipment from transient overvoltages (i.e., surges). Below are the main processes and mechanisms that occur inside an SPD during such events:1. Surge Detection and ResponseWhen a surge caused by a lightning strike enters the power system, the surge protective device quickly detects this abnormal voltage. Typically, SPDs h
Encyclopedia
01/10/2025
What is a fixed capacitance?
What is a fixed capacitance?
1. DefinitionWhat is commonly referred to as a "permanent capacitor" is likely a popular term. Strictly speaking, it may refer to a fixed capacitor. A fixed capacitor is a type of capacitor with a constant capacitance value. In a circuit, its capacitance will not change due to normal voltage, current variations, or other common external conditions. Its main functions include storing electrical energy, filtering, coupling, and bypassing.2. Structure and PrincipleStructureTake the common ceramic c
Encyclopedia
01/10/2025
Free Download Now
Wone is dedicated to serving the personnel in the global power industry.
Join WONE, not only can you discover power equipment and power knowledge, but also can find like-minded friends!
Google App Store Apple App Store Huawei App Store Xiaomi App Store App Store App Store App Store App Store
Message
Email
Inquiry
Inquiry