Applications of DC Generators

Encyclopedia
08/21/2024

DC Generator Definition

A DC generator is a device that converts mechanical energy into direct current electricity for various applications.

Application of Separately Excited DC Generators

  • These type of DC generators are generally more expensive than self-excited DC generators, because they need a separate excitation source. This restricts their applications. They are used where self-excited generators do not perform well.

  • Because of their ability of giving wide range of voltage output, they are generally used for testing purpose in the laboratories.

  • Separately excited generators operate in a stable condition with any variation in field excitation. Because of this property they are used as supply source of DC motors, whose speeds are to be controlled for various applications. Example- Ward Leonard Systems of speed control.

Application of Shunt Wound DC Generators

Shunt generators have limited use due to their dropping voltage characteristic. They supply power to devices located close by. These type of DC generators provide a constant terminal voltage for short-distance operations using field regulators.

  • They are used for general lighting.

  • They are used to charge battery because they can be made to give constant output voltage.

  • They are used for giving the excitation to the alternators.

  • They are also used for small power supply (such as a portable generator).

Application of Series Wound DC Generators

Series wound generators are limited in power supply use due to their increasing terminal voltage with load current. This is evident from their characteristic curve. They provide a constant current in the dropping portion of the curve, making them suitable as a constant current source for various applications.

  • They are used for supplying field excitation current in DC locomotives for regenerative breaking.

  • This types of generators are used as boosters to compensate the voltage drop in the feeder in various types of distribution systems such as railway service.

  • In series arc lightening this type of generators are mainly used.

Application of Compound Wound DC Generators

Compound wound DC generators are the most widely used due to their compensating properties. Depending on the number of series field turns, they can be over compounded, flat compounded, or under compounded. They achieve the desired terminal voltage by compensating for armature reaction and ohmic drops. These generators have many applications.

  • Cumulative compound wound generators are generally used for lighting, power supply purpose and for heavy power services because of their constant voltage property. They are mainly made over compounded.

  • Cumulative compound wound generators are also used for driving a motor.

  • For small distance operation, such as power supply for hotels, offices, homes and lodges, the flat compounded generators are generally used.

  • The differential compound wound generators, because of their large demagnetization armature reaction, are used for arc welding where huge voltage drop and constant current is required.

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Abnormal Operating Condition and Causes of Induction Motors
Abnormal Operating Condition and Causes of Induction Motors
Abnormal Operating Conditions and Causes of Induction MotorsThree-phase induction motors are widely used in industrial applications. Their abnormal operating conditions and causes can be summarized as follows:Abnormal Operating Conditions and Causes of Induction MotorsThe following are the abnormal operating conditions and causes of induction motors:Mechanical OverloadBlockage in Pump/Gear Systems: Obstruction in mechanical systems (e.g., pumps or gears) connected to the motor.Damaged Bearings o
Edwiin
05/19/2025
Polarity Test of a Transformer – Circuit Diagram and Working
Polarity Test of a Transformer – Circuit Diagram and Working
Polarity in Two-Winding TransformersIn two-winding transformers, one terminal of a winding is always positive relative to the other at any instant. Transformer polarity refers to therelative direction of induced voltagesbetween the high-voltage (HV) and low-voltage (LV) windings. In practical transformers, winding terminals are brought out as leads, and polarity defines how these leads are connected and labeled.Significance of Transformer PolarityUnderstanding polarity is critical for several op
Edwiin
05/15/2025
Capacitor Start Induction Motor
Capacitor Start Induction Motor
Capacitor Start Motors are a type of single - phase induction motors. They utilize a capacitor within the auxiliary winding circuit to create a significant phase difference between the current flowing through the main winding and that in the auxiliary winding. As the name "capacitor start" clearly implies, these motors rely on a capacitor specifically for the starting process. The diagram below illustrates the connection schematic of a Capacitor Start Motor.The capacitor start motor features a c
Encyclopedia
05/09/2025
 Thermal Power Plant – Components, Working and Site Selection
Thermal Power Plant – Components, Working and Site Selection
What is a Thermal Power Plant?The law of energy conservation states that energy cannot be created or destroyed; rather, it can only be transformed from one form to another. Electrical energy, in particular, can be harnessed from a variety of energy sources. Facilities designed to generate large - scale electrical energy are commonly referred to as power plants or power stations.A thermal power plant is a type of power generation facility that converts heat energy into electrical energy. Heat ene
Encyclopedia
05/07/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!