What are the Characteristics of Diode?

Encyclopedia
08/28/2024


What are the Characteristics of Diode?


Diode Definition


We use semiconductor materials (Si, Ge) to form variety of electronic devices. The most basic device is diode. Diode is a two terminal PN junction device. PN junction is formed by bringing a P type material in contact with N type material. When a P-type material is brought in contact with N- type material electrons and holes start recombining near the junction. This results in lack of charge carriers at the junction and thus the junction is called depletion region. When we apply voltage across the terminals of PN junction, we call it as diode. The picture below shows the symbol of PN junction diode.

 


b03ac2ff07f17b23ed85a2698b0cb439.jpeg

 


A diode is a unidirectional device that allows current to flow in only one direction, depending on how it is biased.

 


5016017662e0693fe99d6613a8a24a23.jpeg

 


Forward Biasing


When the P-terminal is connected to the positive end of the battery and the N-terminal to the negative, the diode is forward biased.

 


7976df0d9726f929533479e502054b7b.jpeg 


In forward bias, the positive battery terminal repels holes in the P-region and the negative terminal repels electrons in the N-region, pushing them toward the junction. This increases the concentration of charge carriers near the junction, causing recombination and reducing the width of the depletion region. As the forward bias voltage increases, the depletion region narrows further, and current rises exponentially.

 


Reverse Biasing

 


097d939365639d34d01f3b4c06104695.jpeg

 


In reverse biasing P- terminal is connected to negative terminal of the battery and N- terminal to positive terminal of battery. Thus applied voltage makes N side more positive than P side.

 


db51ec14657146b9b4dcdbf8a57c8202.jpeg

 


Negative terminal of the battery attracts majority carriers, holes, in P-region and positive terminal attracts electrons in the N-region and pull them away from the junction. This result in decrease in concentration of charge carriers near junction and width of depletion region increases. A small amount of current flow due to minority carriers, called as reverse bias current or leakage current. As reverse bias voltage is raised depletion region continues to increase in width and no current flows. It can be concluded that diode acts only when forward biased. Operation of diode can be summarized in form of I-V diode characteristics graph.


As reverse bias voltage is further raised, depletion region width increases and a point comes when junction breaks down. This results in large flow of current. Breakdown is the knee of diode characteristics curve. Junction breakdown takes place due to two phenomena.


Avalanche Breakdown


At high reverse voltages, avalanche breakdown happens when minority carriers gain enough energy to knock electrons from bonds, leading to a large current flow.

 


Zener Effect


The Zener effect occurs at lower reverse voltages, where a high electric field breaks covalent bonds, causing a sudden increase in current and junction breakdown.


Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Does a grid-connected inverter need a grid to operate?
Does a grid-connected inverter need a grid to operate?
Grid-connected inverters do need to be connected to the grid to function properly. These inverters are designed to convert direct current (DC) from renewable energy sources, such as solar photovoltaic panels or wind turbines, into alternating current (AC) that synchronizes with the grid in order to feed power into the public grid. Here are some of the key features and operating conditions of grid-connected inverters:The basic working principle of grid-connected inverterThe basic working principl
Encyclopedia
09/24/2024
Advantages of infrared generator
Advantages of infrared generator
Infrared generator is a kind of equipment that can produce infrared radiation, which is widely used in industry, scientific research, medical treatment, security and other fields. Infrared radiation is an invisible electromagnetic wave with a wavelength between visible light and microwave, which is usually divided into three bands: near infrared, middle infrared and far infrared. Here are some of the main advantages of infrared generators:Non-contact measurement No contact: The infrared generato
Encyclopedia
09/23/2024
What is a Thermocouple?
What is a Thermocouple?
What is a Thermocouple?Thermocouple DefinitionA thermocouple is a device that converts temperature differences into an electric voltage, based on the principle of the thermoelectric effect. It is a type of sensor that can measure temperature at a specific point or location. Thermocouples are widely used in industrial, domestic, commercial, and scientific applications due to their simplicity, durability, low cost, and wide temperature range.Thermoelectric EffectThe thermoelectric effect is the ph
Encyclopedia
09/03/2024
What is a Resistance Temperature Detector?
What is a Resistance Temperature Detector?
What is a Resistance Temperature Detector?Resistance Temperature Detector DefinitionA Resistance Temperature Detector (also known as a Resistance Thermometer or RTD) is an electronic device used to determine the temperature by measuring the resistance of an electrical wire. This wire is referred to as a temperature sensor. If we want to measure temperature with high accuracy, an RTD is the ideal solution, as it has good linear characteristics over a wide range of temperatures. Other common elect
Encyclopedia
09/03/2024
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!