This test is performed only to confirm tensile strength of aluminum wires used for conductor in electric power cables. This test is significantly performed on conductor material to judge the strength of this material. A cable conductor is often subjected to pull from one end during laying, installing and manufacturing hence it should be strong enough to tolerate the pulling force as well. Hence it becomes necessary to ensure that the conductor material has sufficient tensile strength.Apparatus r

This test is normally carried on annealed copper wires, aluminum wires for welding cables and solid conductors of electric power cables. The current carrier conductors of power cable is subjected to twist and bend during laying and installation hence it should be flexible enough to take any desired bending and twisting without breaking and cracking. Annealing test for wires and conductors is performed to confirm the durability of conductor during twisting and bending.Process of annealing test fo

The following tests are the type test ofelectrical powercable.Physical tests for insulation and sheath Tensile strength and elongation at break Aging in an air oven Aging in air bomb Aging in an oxygen bomb Hot set Oil resistance Tear resistance Insulation resistance High voltage (water immersion) test Flammability test (only for SE-3, SE-4) Water abortion test (for insulation) Persulphate test (for copper ) Annealing test(for copper) Tensile test(for Aluminium) Wrapping test(

Electric power can be transmitted or distributed either by overhead transmission systems or by underground cables. Cables are mainly designed for a specific requirement. Power cables are mainly used for power transmission and distribution purposes. It is an assembly of one or more individually insulated electrical conductors, usually held together with an overall sheath. The assembly is used for transmission and distribution of electrical power.Electrical power cables may be installed as permane

What are Fiber Optics Cables Used For?Fiber optic cables (also known as optical fiber cable) are network cables that contain many strands of fine glass fibers known as optical fibers, which are kept well-insulated within the body of the cable. These cables are created for the use of long-distance, high-performance data networking, and telecommunications. Signals are transmitted through these cables by firing pulses of light through these optical fibers.In comparison to a copper-wired cable, fibe

What distinguishes a cable from a wire? One of the fundamental questions that still has to be explained .The cable remains to be a single conductor, whichis referred to as a wire, if there was no insulation ontwo conductors.Cable is a collection of two (or)more insulated conductors, whereas wire is a single conductor.A wire is typically a single strand or a number of strands of conductive material, such as copper or aluminium, whereas a cable is made up of two (or)more insulated wires enclosed i