Inductive Voltage Transformer for GIS - Experts Electrical

English
RFQ

Download the app

Inductive Voltage Transformer for GIS

discuss personally

Model

Basic info Product Detail Supplier

Basic info

Brand	Wone
Model NO.	Inductive Voltage Transformer for GIS
Rated voltage	72.5kV
Series	Inductive Voltage Transformer for GIS

Product Detail

Product introduction:
The inductive voltage transformer is used for GIS, it is widely applied to the nominal system voltage is 66-1000kV, and 50/60Hz frequency in power system, for the secondary measurement apparatus, protection and control device provide voltage signal. The product has three-phase and single phase two kinds of structure, in order to facilitate the GIS customer substation site handover test, our company developed the isolated structure of the GIS VT product. When power frequency withstand voltage through the disconnector directly to the VT and GIS isola tion, and enhance the efficiency of acceptance test on site.
Product features:
●Gas optional: SF6 , Mixed gas or Clean air
●Epoxy pouring insulator(Spacer): Provided by GIS manufacturer or purchase from customer-specified suppliers.
●Gas charging valve: Provided by GIS manufacturer or purchase from customer-specified suppliers.
●Partial discharge sensor: According to customer demand selective installation.
●Operating box: The box of three phase products placed at the bottom and single phase products places at the side, can be achieved both manually and electrically operation ways.
●Open and close indication: Using the fish eye type indication, consistent with the GIS.
Main Technical Parameters:

Remark: The parameters in the table are typical engineering parameters, which can be customized according to different customer requirements.

Know your supplier

Wone

Main Categories

High voltage/Low voltage/Wire cable/Instrument meters/New energy/Tester/Production equipment/Generator/Electrical fittings/Integrated Electrical Equipment

Business Type

Design/Manufacture/Sales

Highest Annual Export (USD)

$50,000,000

Professional Experience

1 years

Workplace

65666m²m²

占位

占位

Related Products

Related Knowledges

Development of an Outdoor Integrated Low - Voltage Current Transformer

Development of an Outdoor Integrated Low - Voltage Current Transformer

In power grid construction, line losses reflect planning, design, and operation management. They’re key for evaluating power systems. For refined low - voltage transformer area line loss management, accurate line loss counting is critical. So, solidifying basic data, ensuring data accuracy, and proper original data collection matter for analysis. We must also optimize factors affecting collection accuracy, make preventive measures, and boost refined line loss management.1 Current Status of

What might be the future development trends of outdoor current transformers?

What might be the future development trends of outdoor current transformers?

I'm Echo, a 12-Year Veteran in the CT Industry, Talking About What's Coming NextHi everyone, I'm Echo, and I've been working in the current transformer (CT) industry for 12 years.From learning wiring and equipment debugging with my mentor to now leading a team tackling complex on-site issues, I've witnessed many technological advancements and industry changes. Especially with outdoor current transformers, there have been significant developments, but also much room for improvement.A few days ago

Ratio Trial Verification Method for Current Transformers

Ratio Trial Verification Method for Current Transformers

Fellow electric power calibration workers, you must have encountered this situation: The nameplate of an outdoor current transformer has been tormented by wind, sun, rain, and freezing, to the point where the transformation ratio is indistinguishable! Don't panic, we have a solution - use a current transformer calibrator and through the “transformation ratio trial calibration method”, we can figure out the actual transformation ratio and errors clearly. Here, taking the SHGQ - DC typ

Why Does the Secondary Insulation of Outdoor Current Transformers Drop?

Why Does the Secondary Insulation of Outdoor Current Transformers Drop?

I'm Felix, a 15-Year Veteran in the CT Industry, Sharing What You Need to Watch Out ForHi everyone, I'm Felix, and I've been working with current transformers (CTs) for over 15 years. Today, let’s talk about why the secondary insulation of outdoor CTs sometimes drops, and what you can do to prevent it.Common Causes:1. Moisture Ingress — Poor Sealing is the Biggest Problem!Outdoor CTs are constantly exposed to wind and rain. If the sealing isn't tight enough, moisture can get inside a

What tests need to be conducted on current transformers?

What tests need to be conducted on current transformers?

By Oliver, 8 Years in the Electrical IndustryHi everyone, I'm Oliver, and I've been working in the electrical industry for 8 years.From early days doing substation equipment commissioning to now managing protection and metering configurations for entire distribution systems, one of the most frequently used devices in my work has been the Current Transformer (CT).Recently, a friend who's just starting out asked me:“How do you test current transformers? Is there a simple and effective way to

What should be noted when choosing a current transformer for a 10kV station transformer circuit?

What should be noted when choosing a current transformer for a 10kV station transformer circuit?

Practical Experience Sharing from an Electrical Engineer in the FieldBy James, 10 Years in the Electrical IndustryHi everyone, I'm James, and I've been working in the electrical industry for 10 years.From early involvement in substation design and equipment selection, to later taking charge of relay protection and automation system commissioning for entire projects, one of the most frequently used devices in my work has been the current transformer (CT).Recently, a friend who's just starting out