What is an accurate electrical 2-core concentric cable?

Encyclopedia
10/17/2024

A precise electrical two-core concentric cable is a type of cable with specific structural and performance characteristics.

I. Structural characteristics

Concentric structure

This cable consists of two conductors. Usually, one is located at the center and is called the inner conductor, and the other surrounds the inner conductor and is called the outer conductor. The inner and outer conductors are arranged concentrically, which gives the cable good symmetry and stability. For example, in some high-frequency signal transmission applications, the concentric structure can reduce signal reflection and loss and improve signal transmission quality.

There is usually insulating material between the inner and outer conductors to prevent direct current flow between the two conductors. The choice of insulating material depends on the cable's usage environment and requirements. Common materials include polyethylene, polyvinyl chloride, rubber, etc.

Shielding layer

To reduce the influence of external electromagnetic interference on the internal signals of the cable, a precise electrical two-core concentric cable usually has a shielding layer. The shielding layer can be a metal braid, metal foil, or a combination of both. For example, in some occasions with high requirements for signal anti-interference, such as medical equipment and communication systems, the shielding layer can effectively block external electromagnetic interference and ensure the stable transmission of internal signals of the cable.

The shielding layer can also prevent the internal signals of the cable from radiating outward and reduce interference to surrounding electronic devices.

II. Performance characteristics

Electrical performance

A precise electrical two-core concentric cable has good electrical performance, including low resistance, low capacitance, and low inductance. These characteristics enable the cable to reduce energy loss and signal distortion when transmitting electrical energy or signals. For example, in some high-precision electronic devices, cables with low resistance and low capacitance are needed to ensure the normal operation and measurement accuracy of the equipment.

The insulation performance of the cable is also very important. It can prevent current leakage and short circuits and ensure the safety and reliability of the electrical system. The quality and thickness of the insulating material will affect the insulation performance of the cable. Usually, it needs to be selected according to the usage voltage and environmental conditions of the cable.

Mechanical performance

This cable usually has good mechanical strength and flexibility and can adapt to different installation environments and usage requirements. For example, in some occasions that require frequent movement or bending, such as robots and automated production lines, the cable needs to have good flexibility to avoid breakage or damage during use.

The outer sheath of the cable is usually made of wear-resistant and corrosion-resistant materials to protect the internal conductors and insulation layers of the cable. The material selection of the outer sheath also needs to consider the cable's usage environment. For example, cables used outdoors need to have good weather resistance.

Reliability

A precise electrical two-core concentric cable usually has high reliability and can maintain stable performance during long-term use. This is due to its good structural design, high-quality material selection, and strict manufacturing process. For example, in some critical electrical systems, such as aerospace and nuclear power plants, high-reliability cables are needed to ensure the safe operation of the system.

To improve the reliability of the cable, various tests and inspections can be performed on the cable, such as withstand voltage tests, insulation resistance tests, and signal transmission tests. These tests can ensure that the cable meets relevant standards and requirements before leaving the factory.

In conclusion, a precise electrical two-core concentric cable is a type of cable with specific structural and performance characteristics. It plays an important role in electrical systems and can ensure the stable transmission of electrical energy and signals.


Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

What is Automatic Voltage Regulator?
What is Automatic Voltage Regulator?
An automatic voltage regulator is employed to regulate voltage, converting fluctuating voltages into a constant one. Voltage fluctuations mainly stem from variations in the load on the supply system. Such voltage variations can damage the equipment within the power system. These fluctuations can be mitigated by installing voltage - control equipment at various locations, such as near transformers, generators, and feeders. Multiple voltage regulators are often placed throughout the power system t
Edwiin
05/22/2025
What is Static Voltage Regulator?
What is Static Voltage Regulator?
Types of Static Voltage RegulatorThe static voltage regulator is superior to electromechanical regulators in respect of the accuracy of control, response, reliability and maintenance. The static voltage regulator is mainly classified into two types. They are;Servo Type Voltage RegulatorMagnetic Amplifier RegulatorThe types of static voltage regulator are described below in details;Servo Type Voltage RegulatorThe main feature of the servo type voltage regulator is the use of the amplidyne. The am
Edwiin
05/21/2025
What is Arc Extinction Circuit Breaker?
What is Arc Extinction Circuit Breaker?
When the current-carrying contacts of a circuit breaker separate, an arc forms and persists briefly after contact separation. This arc is hazardous due to the heat energy it generates, which can produce explosive forces.A circuit breaker must extinguish the arc without damaging equipment or endangering personnel. The arc significantly influences the breaker’s performance. Interrupting aDC arcis inherently more challenging than anAC arc. In an AC arc, the current naturally reaches zero duri
Edwiin
05/20/2025
Air Break Circuit Breaker
Air Break Circuit Breaker
In an air break circuit breaker, the arc is initiated and extinguished in substantially static air as the arc moves. These breakers are used for low voltages, generally up to 15 kV, with rupturing capacities of 500 MVA. As an arc-quenching medium, air circuit breakers offer several advantages over oil, including:Elimination of risks and maintenance associated with oil use.Absence of mechanical stress caused by gas pressure and oil movement.Elimination of costs from regular oil replacement due to
Edwiin
05/20/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!