High Voltage Direct Current Transmission | HVDC Transmission

Electrical4u
03/22/2024

What Is High Voltage Direct Current Transmission

The massive transmission of electricity in the form of DC over long distances by means of submarine cables or overhead transmission line is the high voltage direct current transmission. This type of transmission is preferred over HVAC transmission for very long distance when considering the cost, losses and many other factors. The names Electrical superhighway or Power superhighway are often used for HVDC.

HVDC Transmission System

We know that AC power is generated in the generating station. This should first be converted into DC. The conversion is done with the help of rectifier. The DC power will flow through the overhead lines. At the user end, this DC has to be converted into AC. For that purpose, an inverter is placed at the receiving end.

Thus, there will be a rectifier terminal in one end of HVDC substation and an inverter terminal in the other end. The power of the sending end and user end will be always equal (Input Power = Output Power).
HVDC Substation Layout

When there are two converter stations at both ends and a single transmission line is termed as two terminal DC systems. When there are two or more converter stations and DC transmission lines is termed as multi-terminal DC substation.
HVDC components
The components of the HVDC Transmission system and its function are explained below.
Converters: The AC to DC and DC to AC conversion are done by the converters. It includes
transformers and valve bridges.
Smoothing Reactors: Each pole consist of smoothing reactors which are of
inductors connected in series with the pole. It is used to avoid commutation failures occurring in inverters, reduces harmonics and avoids discontinuation of current for loads.
Electrodes: They are actually
conductors which are used to connect the system to the earth.
Harmonic Filters: It is used to minimize the harmonics in
voltage and current of the converters used.

DC Lines: It can be cables or overhead lines.
Reactive Power Supplies: The reactive power used by the converters could be more than 50% of the total transferred active power. So the
shunt capacitors provide this reactive power.
AC Circuit Breakers: The
fault in the transformer is cleared by the circuit breakers. It also used to disconnect the DC link.

HVDC System Configurations

The classification of HVDC links are as follows:

Mono Polar Links

Single conductor is required and water or ground act as the return path. If the earth resistivity is high, metallic return is used.

mono polar links

Bipolar Links

Double converters of same voltage rating are used in each terminal. The converter junctions are grounded.
bipolar link

Homopolar Links

It consists of more than two conductors which is having equal polarity generally negative. Ground is the return path.
homo polar link

Multi Terminal Links

It is used to connect more than two points and is rarely used.

Comparison of both HVAC and HVDC Transmission System


HVDC Transmission System

HVAC Transmission System

Low losses.

Losses are high due to the skin effect and corona discharge

Better Voltage regulation and Control ability.

Voltage regulation and Control ability is low.

Transmit more power over a longer distance.

Transmit less power compared to a HVDC system.

Less insulation is needed.

More insulation is required.

Reliability is high.

Low Reliability.

Asynchronous interconnection is possible.

Asynchronous interconnection is not possible.

Reduced line cost due to fewer conductors.

Line cost is high.

Towers are cheaper, simple and narrow.

Towers are bigger compared to HVDC.


comparison of cost of hvdc and hvac

Disadvantages of HVDC Transmission

  • Converters with small overload capacity are used.

  • Circuit Breakers, Converters and AC filters are expensive especially for small distance transmission.

  • No transformers for altering the voltage level.

  • HVDC link is extremely complicated.

  • Uncontrollable power flow.

Application of HVDC Transmission

  • Undersea and underground cables

  • AC network interconnections

  • Interconnecting Asynchronous system

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Electrical4u

Electrical4U is dedicated to the teaching and sharing of all things related to electrical and electronics engineering.

Classification of Electric Power Distribution Network Systems
Classification of Electric Power Distribution Network Systems
The typical electric power system network is categorized into three main components: generation, transmission, and distribution. Electric power is produced in power plants, which are often located far from load centers. As a result, transmission lines are employed to deliver power over long distances.To minimize transmission losses, high-voltage power is used in transmission lines, and the voltage is reduced at the load center. The distribution system then delivers this power to end-users.Types
Edwiin
06/05/2025
Why is the Ground Wire Always Positioned Above the Overhead Power Lines?
Why is the Ground Wire Always Positioned Above the Overhead Power Lines?
Ground Wire in Overhead Transmission LinesThe ground wire (also called earth wire or OPGW) installed above phase lines in overhead transmission lines acts as a key protective and safety component. It provides lightning protection, ground fault defense, and helps prevent electrical system disruptions.In overhead transmission lines, positioning the ground wire above phase lines serves specific safety and performance purposes. Referred to as a "shield wire" or "static wire," this configuration has
Edwiin
06/04/2025
What is the Power Angle in a Power Transmission Line?
What is the Power Angle in a Power Transmission Line?
The power angle, denoted by δ, is the phase angle difference between two voltage levels in a power transmission line. Specifically, it represents the angular discrepancy between the sending-end voltage phasor and the receiving-end voltage (or between voltages at two bus points). In simpler terms, it quantifies the phase shift between voltage and current waveforms in the transmission line.Also referred to as the torque angle or load angle, this parameter is critical for two key reasons: it
Edwiin
06/04/2025
Permanent Magnet Moving Coil or PMMC Instrument
Permanent Magnet Moving Coil or PMMC Instrument
DefinitionInstruments that utilize a permanent magnet to generate a stationary magnetic field within which a coil moves are known as Permanent Magnet Moving Coil (PMMC) instruments. They operate on the principle that torque is exerted on a moving coil situated in the magnetic field of a permanent magnet. PMMC instruments provide accurate results for direct current (DC) measurements.Construction of PMMC InstrumentThe moving coil and the permanent magnet are the key components of a PMMC instrument
Edwiin
05/30/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!