Electric Power Generation

Master Electrician
03/19/2024

WechatIMG1747.jpeg

We divide the power system into three parts; power generation, transmission, and distribution. In this article, we will discuss power generation. Actually, in power generation, one form of energy gets converted into electrical energy. We produce electrical energy from various natural sources.

We classify these sources into two types renewable sources and non-renewable sources. In a present power system, most of the electrical energy gets generated from non-renewable sources like coal, oil, and natural gases.

But these sources are limitedly available. So, we have to use these sources carefully and always find an alternate source or move on to renewable sources.

The renewable sources include solar, wind, water, tidal, and biomass. These sources are the environment-friendly, free and infinite resources available. Let us get more information about renewable sources.

Solar Energy System

It is the best alternative source for power generation. There are two ways, to generate electrical energy from sunlight.

  1. We can create electricity directly by using photovoltaic (PV) cell. The photovoltaic cell is made up of silicon. Many cells are connected in series or parallel to make a solar panel.

  2. We can produce heat (solar thermal) with the help of mirrors in the sunlight, and we use this heat to convert water into steam. This high-temperature steam rotates the turbines.

Advantages of Solar Energy System

  1. The transmission cost is zero for a stand-alone solar system.

  2. Solar electricity generation system is environment-friendly.

  3. The maintenance cost is low.

  4. It is an ideal source for remote locations that cannot link to the grid.

Disadvantages of Solar Energy System

  1. Initial expenses are high.

  2. Require large area for bulk production.

  3. Solar electricity generation system is weather-dependent.

  4. Solar energy storage (battery) is costly.

WechatIMG1739.jpeg

Wind Energy System

Wind turbines are used to convert wind energy into electrical energy. Wind flows due to temperature changes in the atmosphere. Wind turbines turn wind energy into kinetic energy. The rotating kinetic energy rotates the induction generator, and that generator converts kinetic energy into electrical energy.

Advantages of Wind Energy System

  1. Wind energy is an unlimited, free and clean source of energy.

  2. The operating cost is almost zero.

  3. A wind electricity generating system can generate power in a remote location.

Disadvantage of Wind Energy System

  1. It cannot produce the same amount of electricity at all time.

  2. It needs a big open area.

  3. It makes noise.

  4. The construction process of a wind turbine is expensive.

  5. It gives lower electricity output.

  6. It poses threats from flying birds.

Hydro Energy System

The power obtained from river or ocean water is called hydropower. Hydro power plants are work based on the gravitational effects. Here we store water in a dam or reservoir. When we allow falling the water, the movement of this water as it flows downstream towards the penstock causes kinetic energy that rotates the turbines.

Advantages of Hydro Energy System

  1. It can be used in the service instantly.

  2. After this process, water can be used for irrigation and other purposes.

  3. Dams are designed for an extended period and so it can contribute to the generation of electrical energy for many years.

  4. Running and maintenance costs are low.

  5. No fuel transportation is required.

Disadvantages of Hydro Energy System

  1. The initial cost of a hydel power plant is high.

  2. Hydropower plants are located in the hilly area, and it is very far from the load. So, they require a long transmission line.

  3. The construction of dams can flood towns and cities.

  4. It is also weather-dependent.

Coal Energy System

A thermal power plant produces electricity by burning coal in the boiler. Heat is used to convert water into steam. This high pressure and high-temperature steam flowing into the turbine spins a generator to produce electrical energy.

After it passes through the turbine, the steam gets cooled in a condenser and reuse in the boiler to generate steam again. Thermal power plant works according to Rankine cycle.

Advantages of Coal Energy System

  1. Coal is cheap.

  2. It has less initial cost compared to renewable power plants.

  3. It requires less space than a hydel plant.

  4. We can construct a thermal power plant at any place because coal can be transport to the plant irrespective of its location.

  5. Construction and commissioning of thermal power plants take lesser time than a hydel plant.

Disadvantages of Coal Energy System

  1. Coal is a non-renewable energy source.

  2. The operating cost is high and variable according to the price of fuel.

  3. It pollutes the atmosphere due to smoke and fumes.

  4. It requires a huge quantity of water.

Nuclear Energy System

The working of nuclear power is almost the same as a thermal power plant. In a thermal power plant, coal is used in the boiler to produce heat.

In a nuclear power plant, uranium is used in the nuclear reactor to generate heat. In both power plants, heat energy gets converted into electrical energy.

1kg of uranium can produce energy same as the energy produced by burning of 4500 tonnes of coal or 2000 tonnes of oil.

Advantages of Nuclear Energy System

  1. It requires less space than a thermal power plant and a hydropower plant.

  2. It can produce an unusually high amount of electrical energy from a single plant.

  3. It does not emit CO2

  4. A nuclear power plant needs a small quantity of fuel.

Disadvantages of Nuclear Energy System

  1. It has a high initial construction cost.

  2. It has high operating and maintenance costs.

  3. It has radioactive waste.

  4. It has a high risk of radio-activity and explosion.

Installed Electric Capacity in India

Yearly gross electricity generation by source (GWh) (2016-2017)

Source

Generation (GWh)

Coal

944,861

Oil

275

Gas

49,094

Diesel


Nuclear

37,916

Hydro

122,313

Mini-hydro

7,673

Solar

12,086

Wind

46,011

Biomass

14,159

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Master Electrician

We aim to gather electrical knowledge and share it with others.

Classification of Electric Power Distribution Network Systems
Classification of Electric Power Distribution Network Systems
The typical electric power system network is categorized into three main components: generation, transmission, and distribution. Electric power is produced in power plants, which are often located far from load centers. As a result, transmission lines are employed to deliver power over long distances.To minimize transmission losses, high-voltage power is used in transmission lines, and the voltage is reduced at the load center. The distribution system then delivers this power to end-users.Types
Edwiin
06/05/2025
Why is the Ground Wire Always Positioned Above the Overhead Power Lines?
Why is the Ground Wire Always Positioned Above the Overhead Power Lines?
Ground Wire in Overhead Transmission LinesThe ground wire (also called earth wire or OPGW) installed above phase lines in overhead transmission lines acts as a key protective and safety component. It provides lightning protection, ground fault defense, and helps prevent electrical system disruptions.In overhead transmission lines, positioning the ground wire above phase lines serves specific safety and performance purposes. Referred to as a "shield wire" or "static wire," this configuration has
Edwiin
06/04/2025
What is the Power Angle in a Power Transmission Line?
What is the Power Angle in a Power Transmission Line?
The power angle, denoted by δ, is the phase angle difference between two voltage levels in a power transmission line. Specifically, it represents the angular discrepancy between the sending-end voltage phasor and the receiving-end voltage (or between voltages at two bus points). In simpler terms, it quantifies the phase shift between voltage and current waveforms in the transmission line.Also referred to as the torque angle or load angle, this parameter is critical for two key reasons: it
Edwiin
06/04/2025
Permanent Magnet Moving Coil or PMMC Instrument
Permanent Magnet Moving Coil or PMMC Instrument
DefinitionInstruments that utilize a permanent magnet to generate a stationary magnetic field within which a coil moves are known as Permanent Magnet Moving Coil (PMMC) instruments. They operate on the principle that torque is exerted on a moving coil situated in the magnetic field of a permanent magnet. PMMC instruments provide accurate results for direct current (DC) measurements.Construction of PMMC InstrumentThe moving coil and the permanent magnet are the key components of a PMMC instrument
Edwiin
05/30/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!