What is the Radiator of Transformer?

Encyclopedia
08/09/2024

What is the Radiator of Transformer?

Radiator in Transformer Definition

A radiator in a transformer is defined as a component that helps cool the transformer by dissipating heat from the transformer oil.

bd7b3afd-a3f4-462e-9a60-6d404d41eba3.jpg

Importance of Cooling

Controlling the temperature of the oil is crucial to extend the transformer’s capacity and prevent overheating.

Working Principle

The radiator increases the surface area to dissipate heat, aiding in efficient cooling of the transformer oil.

Type of radiator

Natural air cooled radiator (ONAN) :

Without the help of any auxiliary fan, it relies only on natural convection for heat dissipation.Suitable for small transformers or load changes little, low ambient temperature occasions.

Forced Air Cooled Radiator (ONAF) :

Use a fan to speed up air flow and improve heat dissipation efficiency.Suitable for medium transformers or applications requiring rapid heat dissipation.

Water cooled Radiator (OFAF) :

Using water as cooling medium, the heat in transformer oil is taken away by water cooling pipeline.Suitable for large transformers or high ambient temperature occasions.

Forced Oil Circulation Air Cooled Radiator (ODAF) :

Combining the features of forced oil circulation and forced air cooling, oil is circulated inside and outside the transformer through the oil pump, while fans are used to accelerate the air flow.Suitable for large capacity transformers or applications requiring efficient cooling.

Operation and Enhancement

Radiators cycle warm oil from the transformer through their fins to cool it down, and this process can be boosted with fans or oil pumps.

Safety measure

Electrical isolation: Ensure electrical isolation between the radiator and the transformer body to avoid the risk of short circuit.

Grounding: The heat sink must be well grounded to prevent a fire caused by static electricity accumulation.

Matters needing attention

When performing maintenance or inspection, follow the safety operation rules to ensure the safety of personnel.For large transformers, automated monitoring and control of the cooling system may also need to be considered.

Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

What is Automatic Voltage Regulator?
What is Automatic Voltage Regulator?
An automatic voltage regulator is employed to regulate voltage, converting fluctuating voltages into a constant one. Voltage fluctuations mainly stem from variations in the load on the supply system. Such voltage variations can damage the equipment within the power system. These fluctuations can be mitigated by installing voltage - control equipment at various locations, such as near transformers, generators, and feeders. Multiple voltage regulators are often placed throughout the power system t
Edwiin
05/22/2025
What is Static Voltage Regulator?
What is Static Voltage Regulator?
Types of Static Voltage RegulatorThe static voltage regulator is superior to electromechanical regulators in respect of the accuracy of control, response, reliability and maintenance. The static voltage regulator is mainly classified into two types. They are;Servo Type Voltage RegulatorMagnetic Amplifier RegulatorThe types of static voltage regulator are described below in details;Servo Type Voltage RegulatorThe main feature of the servo type voltage regulator is the use of the amplidyne. The am
Edwiin
05/21/2025
What is Arc Extinction Circuit Breaker?
What is Arc Extinction Circuit Breaker?
When the current-carrying contacts of a circuit breaker separate, an arc forms and persists briefly after contact separation. This arc is hazardous due to the heat energy it generates, which can produce explosive forces.A circuit breaker must extinguish the arc without damaging equipment or endangering personnel. The arc significantly influences the breaker’s performance. Interrupting aDC arcis inherently more challenging than anAC arc. In an AC arc, the current naturally reaches zero duri
Edwiin
05/20/2025
Air Break Circuit Breaker
Air Break Circuit Breaker
In an air break circuit breaker, the arc is initiated and extinguished in substantially static air as the arc moves. These breakers are used for low voltages, generally up to 15 kV, with rupturing capacities of 500 MVA. As an arc-quenching medium, air circuit breakers offer several advantages over oil, including:Elimination of risks and maintenance associated with oil use.Absence of mechanical stress caused by gas pressure and oil movement.Elimination of costs from regular oil replacement due to
Edwiin
05/20/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!