Fresnel Equations: What are they? (Derivation & Explanation)

Electrical4u
03/15/2024

What are the Fresnel Equations?

The Fresnel Equations (also known as the Fresnel coefficients) are defined as the ratio of the electric field of a reflected and transmitted wave to the electric field of the incident wave. This ratio is complex and hence, it describes relative amplitude as well as phase shifts between the waves.

The Fresnel Equations (Fresnel coefficients) describe the reflection and transmission of light when it is incident on an interface between two different mediums. The Fresnel Equations were introduced by Augustin-Jean Fresnel. He was the first who understand that the light is a transverse wave.

When the light is incident on the surface of a dielectric, it will be reflected and refracted as a function of angle of incidence. The direction of the reflected wave is given by the “Law of Reflection”.

The Fresnel effect is seen in regular life. It can be seen in shiny as well as rough surfaces also. This effect is very clear on the water surface. When a light incident on water from the air medium, the light will reflect according to the angle of incidence.

The Fresnel effect is everywhere. If you try to look around, you will find many examples. This effect highly depends on the angle of incidence.

The angle of incidence is the angle between the line of sight and surface of the object you are looking for. The below figure shows the effect of the angle of an incident in Fresnel reflection.

S and P Polarizations

The plane which has the surface normal and the propagation vector of the incoming radiation is known as the plane of incidence or incidence plane.

The plane of incidence plays an important role in the strength of reflection of incident light polarization. The polarization is defined as a property of a transverse wave that specifies the geometrical orientation of the oscillation.

There are two types of polarization;

  • S-Polarization

  • P-Polarization

When the polarization of light is perpendicular to the plane of the incident, the polarization is known as S-polarization. The ‘S’ word comes from the German word senkrecht that means perpendicular. S-polarization is also known as Transverse Electric (TE).

When the polarization of light is parallel to the plane of an incident or it lying in the plane of an incident. The plane is known as P-Polarization. S-polarization is also known as Transverse Magnetic (TM).

The below figure shows that the incident light is reflected and transmitted in S-polarization and P-Polarization.

Fresnel Equations Complex Index of Refraction

The Fresnel Equations are a complex equation that means it considers the magnitude and phase both. The Fresnel Equations represents in terms of the electromagnetic field complex amplitude that consider the phase besides power.

These equations are the ratios of an electromagnetic field and it makes in various forms. The complex amplitude coefficients are represented by r and t.

The reflection coefficient ‘r’ is a ratio of electric field complex amplitude of the reflected wave to the incident wave. And the reflection coefficient ‘t’ is a ratio of electric field complex amplitude of the transmitted wave to the incident wave.

As shown in the above figure, we have assumed that the angle of incidence is θi, reflected at an angle of θr, and transmitted at an angle of θt.

Ni is the refractive indices of a medium of incident light and Nt is the refractive indices of a medium of transmitted light.

Hence, there are four Fresnel Equations; two equations for reflection coefficient ‘r’ that is (rp and rs) and two equations for reflection coefficient ‘t’ that is (tp and ts).

Fresnel Equations Derivation

Let’s assume that incident light reflects as shown in the above figure. In the first case, we will derive a Fresnel Equation for S-Polarization.

For S-Polarization, parallel component E and perpendicular component B is continuous across the boundary between two media.

Hence from the boundary condition, we can write equations for E-field and B-field,

(1) \begin{equation*}E_i + E_r = E_t\end{equation*}


\begin{equation*}B_i \cos(\theta_i) - B_r \cos(\theta_r) = B_t \cos(\theta_t)\end{equation*}

We use the below relation between B and E to eliminate B. 

\[ B = \frac{nE}{c_0} \]

And from the law of reflection, 

\[ \theta_i = \theta_r \]


Put this value in eq-2,

(3) 

\begin{equation*} \frac{n_i E_i}{c_0} \cos(\theta_i) - \frac{n_i E_r}{c_0} \cos(\theta_i)  = \frac{n_t E_t}{c_0} \cos(\theta_t)  \end{equation*}


(4) 

\begin{equation*}n_i \cos(\theta_i) [ E_i - E_r ] = n_t E_t \cos(\theta_t)  \end{equation*}


(5) 

\begin{equation*}n_i \cos(\theta_i) [ E_i - E_r ] = n_t [ E_i + E_r ] \cos(\theta_t)  \end{equation*}


(6) 

\begin{equation*}n_i E_i \cos(\theta_i) - n_i E_r \cos(\theta_i) = n_t E_i \cos(\theta_t) + n_t E_r \cos(\theta_t)\end{equation*}


(7) 

\begin{equation*}n_i E_i \cos(\theta_i) -  n_t E_i \cos(\theta_t) =  n_t E_r \cos(\theta_t) +  n_i E_r \cos(\theta_i) \end{equation*}


(8)
 

\begin{equation*}E_i [ n_i \cos(\theta_i) -  n_t \cos(\theta_t) ] =   E_r  [n_t \cos(\theta_t) +  n_i \cos(\theta_i)]\end{equation*}


(9

\begin{equation*}r_s = \frac{E_r}{E_i} = \frac{n_i \cos(\theta_i) -  n_t \cos(\theta_t)}{n_t \cos(\theta_t) +  n_i \cos(\theta_i)}\end{equation*}

Now, for reflection coefficient t, from eq-1 and eq-4,

(10

\begin{equation*}n_i \cos(\theta_i) [ E_i - (E_t - E_i) ] = n_t E_t \cos(\theta_t)  \end{equation*}


(11) 

\begin{equation*}n_i \cos(\theta_i) [ 2E_i - E_t ] = n_t E_t \cos(\theta_t)  \end{equation*}


(12) 

\begin{equation*} 2E_i n_i \cos(\theta_i) - E_t n_i \cos(\theta_i) = n_t E_t \cos(\theta_t)  \end{equation*}


(13)
 

\begin{equation*} 2E_i n_i \cos(\theta_i) = E_t n_i \cos(\theta_i) + n_t E_t \cos(\theta_t)  \end{equation*}


(14

\begin{equation*}t_s = \frac{E_t}{E_i} = \frac{2 n_i \cos(\theta_i)}{ n_i \cos(\theta_i) + n_t \cos(\theta_t)} \end{equation*}


These are the Fresnel Equations for perpendicularly polarized light (S-Polarization).

Now, let’s derive equations for parallel polarized light (P-Polarization).

For S-Polarization, equations for E-field and B-field is;

(15) 

\begin{equation*}E_i \cos(\theta_i) + E_r \cos(\theta_i) = E_t \cos(\theta_t)\end{equation*}


(16) 

\begin{equation*}B_i - B_r = B_t\end{equation*}


We use the below relation between B and E to eliminate B. 

 

\[ B = \frac{nE}{c_0} \]


(17) 

\begin{equation*}n_i E_i - n_i E_r = n_t E_t\end{equation*}


  

\[  n_i [E_i - E_r] = n_t E_t \]


 
 

\[ \frac{n_i}{n_t} [E_i - E_r] = E_t \]


Put this value in eq-15,

(18) 

\begin{equation*}E_i \cos(\theta_i) + E_r \cos(\theta_i) =  \frac{n_i}{n_t} [E_i - E_r] \cos(\theta_t)\end{equation*}


(19) 

\begin{equation*}n_t [E_i \cos(\theta_i) + E_r \cos(\theta_i)] =  {n_i} [E_i - E_r] \cos(\theta_t)\end{equation*}


(20) 

\begin{equation*}n_t E_i \cos(\theta_i) + n_t E_r \cos(\theta_i) = n_i E_i \cos(\theta_t) -  n_i E_r \cos(\theta_t)\end{equation*}


(21) 

\begin{equation*} n_t E_i \cos(\theta_i) - n_i E_i \cos(\theta_t) = -n_t E_r \cos(\theta_i) - n_i E_r \cos(\theta_t) \end{equation*}


(22) 

\begin{equation*}E_i [n_t \cos(\theta_i) - n_i \cos(\theta_t)] = -E_r [n_t \cos(\theta_i)  + n_i \cos(\theta_t)]     \end{equation*}


(23) 

\begin{equation*}E_i [ n_i \cos(\theta_t) - n_t \cos(\theta_i)] = E_r [n_t \cos(\theta_i)  + n_i \cos(\theta_t)]     \end{equation*}


(24) 

\begin{equation*}r_p = \frac{E_r}{E_i} = \frac{ n_i \cos(\theta_t) - n_t \cos(\theta_i)}{n_t \cos(\theta_i)  + n_i \cos(\theta_t)}\end{equation*}


Now, for reflection coefficient t, from eq-17

  

\[ n_i E_i - n_t E_t = n_i E_r \]     \[ E_i -\frac{n_t}{n_i} E_t = E_r \]


Put this value in eq-15

(25) 

\begin{equation*}E_i \cos(\theta_i) +  [ E_i -\frac{n_t}{n_i} E_t]  \cos(\theta_i) = E_t \cos(\theta_t)\end{equation*}

(26) 

\begin{equation*}E_i \cos(\theta_i) + E_i \cos(\theta_i) - \frac{n_t}{n_i} E_t \cos(\theta_i) = E_t \cos(\theta_t) \end{equation*}


(27) 

\begin{equation*}2 E_i \cos(\theta_i) = \frac{n_t}{n_i} E_t \cos(\theta_i) + E_t \cos(\theta_t) \end{equation*}


(28) 

\begin{equation*}2 E_i n_i \cos(\theta_i) = n_t E_t \cos(\theta_i) +  {n_i} E_t \cos(\theta_t) \end{equation*}


(29) 

\begin{equation*}2 E_i n_i \cos(\theta_i) = E_t [n_t \cos(\theta_i) +  {n_i} \cos(\theta_t)] \end{equation*}


(30

\begin{equation*} t_p = \frac{E_t}{E_i} = \frac{2 n_i \cos(\theta_i)}{ n_t \cos(\theta_i) +  {n_i} \cos(\theta_t)}  \end{equation*}


Let’s summarized all four Fresnel’s equations,  

\[ r_s = \frac{n_i \cos(\theta_i) -  n_t \cos(\theta_t)}{n_t \cos(\theta_t) +  n_i \cos(\theta_i)} \]

  

\[ t_s = \frac{2 n_i \cos(\theta_i)}{ n_i \cos(\theta_i) + n_t \cos(\theta_t)} \]


  

\[ r_p = \frac{ n_i \cos(\theta_t) - n_t \cos(\theta_i)}{n_t \cos(\theta_i)  + n_i \cos(\theta_t)} \]


  

\[ t_p = \frac{2 n_i \cos(\theta_i)}{ n_t \cos(\theta_i) +  {n_i} \cos(\theta_t)} \]

Statement: Respect the original, good articles worth sharing, if there is infringement please contact delete.

Electrical4u

Electrical4U is dedicated to the teaching and sharing of all things related to electrical and electronics engineering.

What are the benefits of motion sensing lights?
What are the benefits of motion sensing lights?
Smart Sensing and ConvenienceMotion-sensing lights utilize sensing technology to automatically detect the surrounding environment and human activity, turning on when someone passes by and turning off when no one is present. This intelligent sensing feature offers great convenience for users, eliminating the need to manually switch on lights, especially in the dark or dimly lit environments. It quickly illuminates the space, facilitating users' walking or engaging in other activities .Energy Savi
Encyclopedia
10/30/2024
What is the difference between a cold cathode and a hot cathode in discharge lamps?
What is the difference between a cold cathode and a hot cathode in discharge lamps?
The main differences between the cold cathode and hot cathode in discharge lamps are as follows:Luminescence principle Cold Cathode: Cold cathode lamps generate electrons through glow discharge, which bombard the cathode to produce secondary electrons, thus sustaining the discharge process. The cathode current is mainly contributed by positive ions, resulting in a small current, so the cathode remains at a low temperature. Hot Cathode: A hot cathode lamp generates light by heating the cathode (u
Encyclopedia
10/30/2024
What are the drawbacks of LED lights?
What are the drawbacks of LED lights?
Disadvantages of LED LightsWhile LED lights have many advantages, such as energy efficiency, long lifespan, and environmental friendliness, they also have several disadvantages. Here are the main drawbacks of LED lights:1. High Initial Cost Price: The initial purchase cost of LED lights is typically higher than that of traditional bulbs (such as incandescent or fluorescent bulbs). Although over the long term, LED lights can save money on electricity and replacement costs due to their low energy
Encyclopedia
10/29/2024
Are there any precautions when wiring solar street light components?
Are there any precautions when wiring solar street light components?
Precautions for Wiring Solar Street Light ComponentsWiring the components of a solar street light system is a crucial task. Correct wiring ensures the system operates normally and safely. Here are some important precautions to follow when wiring solar street light components:1. Safety First1.1 Turn Off the PowerBefore Operation: Ensure that all power sources of the solar street light system are turned off to avoid electric shock accidents.1.2 Use Insulated ToolsTools: Use insulated tools for wir
Encyclopedia
10/26/2024
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!