Why does the engine continue to run when the negative terminal is removed from the battery?

Encyclopedia
09/27/2024

After removing the negative electrode of the battery, the vehicle's electrical system should theoretically stop working immediately, because the battery is one of the main power sources of the vehicle's electrical system, and the negative electrode is the part that connects the body (usually as a ground wire). However, in some cases, the engine may continue to operate even if the negative battery connection is removed, often because the electrical system and engine management system design inside the vehicle allow for temporary electrical interruptions. Here are some possible reasons for this:


Action of capacitor


Capacitor storage


The engine management system (ECU) and other critical components such as the ignition system may be equipped with capacitors. These capacitors can store enough power for a short period of time to allow the engine to continue running for a while until the power in the capacitor is exhausted.


Continuous power supply of generator (alternator)


Generator continuous supply


After the negative battery electrode is removed, the vehicle's alternator can continue to supply power to the electrical system. The alternator is usually connected to the engine and produces alternating current when the engine is running, which is then converted into direct current by a rectifier to supply the vehicle.


Even if the battery is disconnected, as long as the alternator can work properly, it can continue to power critical systems to keep the engine running.


Vehicle design features


Vehicle design


Some modern vehicle designs allow for a degree of electrical interruption to ensure that critical systems can continue to operate for some time in the event of battery failure or disconnection, giving the driver enough time to safely park the vehicle.


Precautions in actual operation


It is worth noting that although the engine may continue to run after removing the negative battery electrode, this is a temporary phenomenon and is not recommended because:


  • Electrical system instability: Removing the negative battery electrode for a long period of time may cause electrical system instability, causing various problems such as data loss and sensor failure.



  • Risk of damage: Prolonged operation without batteries or poorly connected batteries may damage alternators or other electrical components.



  • Safety concerns: Before performing any electrical repairs, it is best to ensure that the vehicle is completely powered off to avoid electric shock and other safety hazards.


In conclusion, while the engine may continue to run for some time after removing the negative battery electrode, this does not mean that it is safe or reasonable to do so. Before performing any operation that involves disconnecting the battery, you should consult the repair manual provided by the vehicle manufacturer and follow all relevant safety guidelines.


Encyclopedia

The Electricity Encyclopedia is dedicated to accelerating the dissemination and application of electricity knowledge and adding impetus to the development and innovation of the electricity industry.

Load Frequency Control (LFC) & Turbine Governor Control (TGC) in Power System
Load Frequency Control (LFC) & Turbine Governor Control (TGC) in Power System
Brief Introduction to Thermal Generating UnitsElectricity generation relies on both renewable and non - renewable energy resources. Thermal generating units represent a conventional approach to power production. In these units, fuels such as coal, nuclear energy, natural gas, biofuel, and biogas are combusted within a boiler.The boiler of a generating unit is an extremely complex system. In its simplest conception, it can be visualized as a chamber whose walls are lined with pipes, through which
Edwiin
06/06/2025
Why 3-Phase Power? Why Not 6, 12 or More for Power Transmission?
Why 3-Phase Power? Why Not 6, 12 or More for Power Transmission?
It is well-known that single-phase and three-phase systems are the most prevalent configurations for power transmission, distribution, and end-use applications. While both serve as fundamental power supply frameworks, three-phase systems offer distinct advantages over their single-phase counterparts.Notably, multi-phase systems (such as 6-phase, 12-phase, etc.) find specific applications in power electronics—particularly in rectifier circuits and variable frequency drives (VFDs)—wher
Edwiin
06/05/2025
How Many Poles and Towers are Situated Within a 1-km Span?
How Many Poles and Towers are Situated Within a 1-km Span?
The number of distribution poles and transmission towers within a 1-kilometer stretch of overhead lines varies significantly based on multiple factors, including voltage level, power line type, supporting structure, geographical location, local regulations, and specific grid requirements.In urban areas, distribution utility poles are typically positioned at closer intervals, while in rural regions, they are spaced farther apart. Additionally, the use of taller structures for higher-voltage trans
Edwiin
06/05/2025
Synchronizing Power and Torque Coefficient
Synchronizing Power and Torque Coefficient
Definition of Synchronizing PowerSynchronizing power, denoted as Psyn, is defined as the variation in synchronous powerP with respect to changes in the load angle δ. Also referred to as thestiffness of coupling,stability factor, orrigidity factor, it quantifies a synchronous machine’s (generator or motor) inherent tendency to maintain synchronism when connected to infinite busbars.Principle of Synchronism MaintenanceConsider a synchronous generator transmitting a steady power Pa at a
Edwiin
06/04/2025
Inquiry
Download
Experts Electrical is dedicated to serving the personnel in the global power industry.
Join Experts Electrical, not only can you discover power equipment and power knowledge, but also canhnd like - minded friends!